7 Reasons Why Civil Engineers Should Be Using InSAR

Monday, 21 August 2023

Have you considered using InSAR as a complimentary monitoring technique for infrastructure assets, but wondered how it would benefit your monitoring programs? Our recent blog highlights seven key benefits of using InSAR to monitor larger linear infrastructure

1. Accurate Monitoring: InSAR technology allows for accurate and precise monitoring of infrastructure, including bridges, dams, and buildings. It can detect even the slightest changes in ground displacement, allowing engineers to detect potential problems early on and take corrective actions

2. Cost-Effective: InSAR is a cost-effective solution for infrastructure monitoring as it reduces the need for physical inspections and helps to detect problems early, avoiding costly repairs and replacements in the future

3. Non-Invasive: InSAR is a non-invasive technique that does not require drilling or excavation, making it an ideal solution for monitoring structures such as bridges and dams, which may be difficult to access

4. Real-Time Monitoring: InSAR technology provides real-time monitoring of infrastructure, enabling engineers to respond quickly to any changes in ground displacement or deformation. This allows for timely interventions, reducing the risk of catastrophic failure

5. Improved Safety: InSAR technology helps to improve the safety of infrastructure by providing early detection of potential problems. This allows engineers to take corrective action before any accidents occur, reducing the risk to human life

6. Enhanced Decision Making: InSAR data can be used to make informed decisions about infrastructure maintenance and repair. By providing accurate and up-to-date information on ground displacement and deformation, engineers can make data-driven decisions to ensure the safety and longevity of infrastructure

7. Comprehensive Coverage: InSAR technology provides comprehensive coverage of large areas, making it an ideal solution for monitoring infrastructure over a wide area. This allows engineers to monitor multiple structures simultaneously, providing a more comprehensive picture of the infrastructure's condition

In conclusion, InSAR technology is a powerful tool that can help civil engineers monitor infrastructure accurately, cost-effectively, and in real-time. It can provide early detection of potential problems, improve safety, and enhance decision-making. As such, civil engineers should be using InSAR to monitor infrastructure to ensure the safety and longevity of our critical infrastructure.

SatSense Santa Tracker: Bringing Christmas Magic to Your DoorstepThursday, 05 December 2024 SatSense and Zonguldak Bülent Ecevit University Partner to Revolutionise Ground Movement Monitoring in TürkiyeTuesday, 23 July 2024 SatSense continues to support STEM students to drive innovationWednesday, 08 May 2024 Are UK water companies prepared for another record-breaking summer?Friday, 23 February 2024 Monitoring Rail Infrastructure Using InSARWednesday, 07 February 2024 Revolutionising Infrastructure Monitoring Using InSAR DataThursday, 01 February 2024 SatSense Gets Contract for the DRIPIN Demonstration ProjectWednesday, 24 January 2024 How can asset managers get the most out of InSAR? Monday, 21 August 2023 How can InSAR data be used in GIS software? Monday, 21 August 2023 7 Reasons Why Civil Engineers Should Be Using InSARMonday, 21 August 2023 SatSense and GNS Science Partner to Revolutionise Ground Movement Monitoring in New ZealandThursday, 20 July 2023 Do Onshore Wind Farms Come with Geotechnical Risk?Thursday, 22 September 2022 Our Water Networks Handled the Heat Last Time But What About the Next?Thursday, 11 August 2022 Analysing Bridge Movement Using Satellite DataFriday, 06 May 2022 To What Extent Can We Monitor Ageing Infrastructure?Tuesday, 03 May 2022 The Climate Change Challenge Facing Rail InfrastructureWednesday, 27 April 2022 Keeping Rail Asset Management on the Right Tracks with InSARWednesday, 06 April 2022 Remotely Monitoring Ground Movement for Water UtilitiesTuesday, 22 March 2022 A Damming DilemmaThursday, 10 March 2022 How Can Asset Managers Remotely Monitor Ground Movement?Tuesday, 08 March 2022 Using InSAR to Monitor Assets in Remote LocationsMonday, 28 February 2022 Overcoming Site Monitoring Challenges with InSARWednesday, 23 February 2022 Project Update: Using InSAR Data to Monitor Disused Coal Tips in WalesFriday, 28 January 2022 How Can Remote Technology Aid Tunnelling Engineers?Thursday, 13 January 2022 What Did 2021 Look Like for SatSense?Monday, 20 December 2021 Using InSAR to Monitor Rates of Coastal ErosionWednesday, 15 December 2021 Is it Time to Ground the Extraction of Groundwater?Tuesday, 30 November 2021 SatSense Appoints John McArthur as Chairman to Prepare for Further GrowthTuesday, 30 November 2021 Dam Important DataTuesday, 05 October 2021 Real Time Data Dashboards and the Future of Smart Asset MonitoringTuesday, 05 October 2021 LiDAR vs InSARMonday, 23 August 2021 SatShop Delivers Ground Movement Data at the Click of a ButtonThursday, 29 July 2021 The Light at the End of the TunnelWednesday, 21 July 2021 Join SatSense – we’re hiring!Thursday, 15 July 2021 Analysing movements of the UK’s railway with Network RailThursday, 24 June 2021 Using satellite data to reduce water leakageMonday, 19 April 2021 SatShop portal FAQ’s Friday, 09 April 2021 Satellite data at your fingertipsThursday, 04 March 2021 Avoiding mining disasters with InSAR dataTuesday, 26 January 2021 Using SatSense data to accelerate your geotechnical desk studyWednesday, 16 December 2020 Water treatment works expansionWednesday, 09 December 2020 Using InSAR data to magnify insight in previously unsighted industriesTuesday, 24 November 2020 Ways to improve InSAR data coverageWednesday, 07 October 2020 Automatically detecting movement of infrastructureFriday, 31 July 2020 Getting ground movement direction out of our dataWednesday, 08 July 2020 Creating the SatSense Data PortalTuesday, 07 July 2020 Detecting House Subsidence Using Satellites and InSARFriday, 05 June 2020 Risk indices for detecting ground movement issues using InSARMonday, 01 June 2020 Detecting sinkholes from spaceFriday, 08 May 2020 How SatSense stays ahead of the curveThursday, 07 May 2020 Matt reflects on joining SatSense and says a bit about himselfWednesday, 22 April 2020